Thanks for your interest in the coding project.
Below is all the information you’ll need as per the project ad to get an understanding of the project.
Files For Your Reference.
The input file is a typical file we might receive. The output file is a completed version of the input file that we’ve manually edited. You’ll also find a version of our QPOD rules below which might help in your understanding of how QPOD’s fit into a foundation system.
A very rough working example
Below is a very rough (and terrible) working example of what we’re looking to do. This was made in a couple of hours, but gives a very brief overview of what we’re looking to do. Your finished example will look much better than this.
QPOD Auto Layout
Slab
Features
Shower: 2×2 recessed (+400mm buffer). Thickening: draw line; spacers along it. Exclusion: removes pods/extenders/caps after fill.
Edit
Render & Export
Counts
0Pods (550/545)
0Extenders
0Caps
0Spacers
0.0Perimeter (m)
0.0Area (m²)
■ Pods (light grey)
■ Recessed pods (steel blue)
▬ Extenders (green)
▬ Caps (pink)
─ Spacers 100/300/400 (red)
─ Centre Spacer QP3CS (purple)
■ Exclusion zones (amber)
Scale bar = 1m